Meters to feet

Meters to feet converter: choose a direction, then enter one length. 1 m is 3.2808 ft, and 1.80 m gives 5.9055 ft and 5 ft 10.87 in. The calculator divides or multiplies by 0.3048.

Inputs

Quick picks

Live ruler (up to 3 m)

Result

Enter a length in the meters field. The result shows decimal feet and the same length in feet and inches.

This page converts one length between meters and feet. If you start from centimeters and need separate foot and inch fields, open cm to feet and inches. For yards, see meters and yards.

How results are calculated

The calculator finds feet by dividing meters by 0.3048. The other way, it multiplies feet by 0.3048. 1 ft is exactly 0.3048 m — that is the international foot fixed in 1959. 1 m is 3.2808 ft, or 3 ft 3.37 in. A 1.80 m height is 5.9055 ft, or 5 ft 10.87 in. A 2.5 m ceiling is 8.2021 ft. A 10 m pool is 32.8084 ft, not a neat 33.

In the US, height, door labels, and many drawings use feet and inches. A metric ID may still list meters. When you enter 1.80, keep “Meters to feet” selected. 6 ft on a door frame is 1.8288 m. One hundred meters of track is 328.0840 ft.

Choose the direction first, then enter one number. A comma and a period mean the same fraction. Zero is allowed. An empty field does not start a calculation. Negative numbers are rejected. The panel shows the decimal result, feet and inches, and centimeters. The live ruler marks values up to 3 m.

Decimal feet are handy for drawings and spreadsheets. Feet and inches fit a US height line. The cm to feet and inches page starts from centimeters and uses separate foot and inch fields. Yards, and kilometers with miles, are on other pages, as is floor area in m² and ft².

Height, ceilings, and beams all use the same 0.3048 m foot. Do not enter 180 in the meters field when you mean centimeters — open cm to feet and inches instead. This page does not use the older US survey foot.

Formula

This is a length conversion using the international foot: since 1959, 1 ft is exactly 0.3048 m. NIST and BIPM define the SI meter. Feet and inches come from the fractional part of the foot times 12.

ft = m ÷ 0.3048

m = ft × 0.3048

inches = fractional part of ft × 12

For 1.80 m, 1.80 ÷ 0.3048 is 5.9055118…, shown as 5.9055 ft. The fractional part 0.9055 × 12 is 10.87 in, so the reading is 5 ft 10.87 in. For 6 ft, 6 × 0.3048 is 1.8288 m.

Ruler: 1.80 m sits at 5.9055 ft, which is 5 ft 10.87 in
0 m 0.0000 ft 0.5 m 1.6404 ft 1 m 3.2808 ft 1.5 m 4.9213 ft 1.8 m 5.9055 ft 2 m 6.5617 ft 2.5 m 8.2021 ft 3 m 9.8425 ft 1.80 m = 5.9055 ft = 5 ft 10.87 in
  • Meters are on the left and feet on the right. The same point has one decimal reading and one feet-and-inches reading.
Meters to feet conversion table (with inches)
MetersDecimal feetFeet and inches
1 m3.2808 ft3 ft 3.37 in
1.5 m4.9213 ft4 ft 11.06 in
1.8 m5.9055 ft5 ft 10.87 in
2 m6.5617 ft6 ft 6.74 in
2.5 m8.2021 ft8 ft 2.43 in
3 m9.8425 ft9 ft 10.11 in
6 m19.6850 ft19 ft 8.22 in
10 m32.8084 ft32 ft 9.70 in
100 m328.0840 ft328 ft 1.01 in

How to use

  1. Choose “Meters to feet” or “Feet to meters”. The direction sets the unit for the number below.
  2. Enter one length, or use a quick pick such as 1.80 m or 6 ft.
  3. The result updates right away: 1.80 m gives 5.9055 ft and 5 ft 10.87 in. Centimeters appear next to them.
  4. The live ruler marks values up to 3 m. Longer lengths are shown only in the result panel.
  5. If you start from centimeters with separate foot and inch fields, use cm to feet and inches.

m, ft, and feet with inches

1 ft = 0.3048 m. The panel shows a decimal result and a feet-and-inches reading.

m
Meter. Examples: 1.80 m height, 2.5 m ceiling, 10 m pool. 1000 m is not 1 mile.
ft
International foot, exactly 0.3048 m. From 1.80 m you get 5.9055 ft.
feet and inches
Whole feet plus the leftover fraction times 12. 1.80 m is 5 ft 10.87 in, not automatically 5 ft 11 in.
0.3048
Exact length of one foot in meters since 1959.

Article background: the 1959 international foot

In 1959 the United States, the United Kingdom, Canada, Australia, New Zealand, and South Africa agreed on exact metric definitions for the international yard and pound. That agreement fixed the international foot at 1 ft = 0.3048 m exactly. It is not “about a foot.” It is a constant a reporter can quote without guessing.

For a US reader the everyday contrast is height. An ID abroad may list 1.80 m, while a US form often expects 5 ft 11 in. 1.80 m is 5.9055 ft, which splits to 5 ft 10.87 in. Rounding that to 5 ft 11 in already moves the height by a few millimeters. Door labels at 6 ft 8 in and ceiling notes in decimal feet use the same factor.

Aviation adds another familiar case: flight levels worldwide are still spoken in feet. Flight level 350 is 35,000 ft, which is 10,668 m. This page uses the international foot, not the older US survey foot that NIST has been retiring from surveying work.

Examples

Example 1

  • Length: 1.80 m
  • Direction: meters to feet

5.9055 ft · 5 ft 10.87 in

A metric height written in US feet and inches.

Example 2

  • Length: 1 m
  • Direction: meters to feet

3.2808 ft · 3 ft 3.37 in

1 m of beam. Rounding to 3.3 ft already shifts the length by about 6 mm.

Example 3

  • Length: 1 ft
  • Direction: feet to meters

0.3048 m

1 ft is exactly 0.3048 m — the definition of the international foot.

Example 4

  • Length: 10 m
  • Direction: meters to feet

32.8084 ft

A 10 m pool is 32.8084 ft, not a neat 33.

Example 5

  • Length: 6 ft
  • Direction: feet to meters

1.8288 m

6 ft on a door frame is 1.8288 m.

Example 6

  • Length: 2 m
  • Direction: meters to feet

6.5617 ft · 6 ft 6.74 in

2 meters in feet — a common long-tail lookup.

Example 7

  • Length: 3 m
  • Direction: meters to feet

9.8425 ft · 9 ft 10.11 in

3 meters is not 10 feet; it falls about 4.8 cm short.

Related calculators

Frequently asked questions

How do I convert meters to feet?

The calculator divides meters by 0.3048: ft = m ÷ 0.3048. From feet to meters it multiplies by 0.3048. 1 ft is exactly 0.3048 m.

How many feet are in 1 meter?

1 m is 3.2808 ft, or 3 ft 3.37 in. It is not exactly 3 feet.

How many feet are in 1.8 meters?

1.80 m is 5.9055 ft, or 5 ft 10.87 in. Without rounding, it is not 5 ft 11 in.

How many feet are in 2 meters?

2 m is 6.5617 ft, or 6 ft 6.74 in.

Is 3 meters equal to 10 feet?

No. 3 m is 9.8425 ft, or 9 ft 10.11 in. That is about 4.8 cm short of 10 feet.

How do I convert feet to meters?

Choose Feet to meters and enter a length in feet. The calculator multiplies by 0.3048. 6 ft is 1.8288 m.

What is 5 foot 11 in meters?

5 ft 11 in is 1.8034 m. That is a little taller than 1.80 m, which is 5 ft 10.87 in.

Does the result also show feet and inches?

Yes. The main result is decimal, and next to it you also get feet and inches. 1.80 m is 5.9055 ft and 5 ft 10.87 in.

Where is the meters to feet conversion table?

The conversion table is on this page. It lists meters, decimal feet, and feet with inches, including 1 m, 1.80 m, 2 m, 3 m, and 10 m.

Is this the 0.3048 m foot or survey foot?

This page uses the international foot: exactly 0.3048 m. The US survey foot differs by a fraction and is not mixed into ordinary height or beam work here.

Can the length be negative?

Zero in the length field is allowed: 0 m gives 0 ft, and 0 ft gives 0 m. A negative number does not give a result. Work out a level difference separately, then enter a non-negative value in the length field.

Does an empty field count as 0 m?

No. An empty length field does not start a calculation. An entered 0 with meters to feet selected is 0 ft; with feet to meters selected it is 0 m.

Does 1.80 with a comma work?

Yes. 1.80 and 1,80 are the same length. 1.80 m is 5.9055 ft.

How is this different from cm to feet and inches?

Here you enter meters or decimal feet. On that page you start from centimeters or from separate foot and inch fields.

Do you convert apartment area in feet here?

No. This page converts one length. Square meters and square feet are on the m² and ft² page.

How many meters is 6 ft?

6 × 0.3048 = 1.8288 m. A hundred meters of track is 328.0840 ft. The same 0.3048 factor applies.

How many feet is 10 m?

10 ÷ 0.3048 is 32.8084 ft, not a neat 33. Any rounding for a sign is up to you.

Does the header switch change the number I entered?

No. You choose meters to feet or feet to meters on the list. The header unit switch does not change the length you entered.

1 m is 3.2808 ft; 1.80 m is 5.9055 ft, or 5 ft 10.87 in.

Sources

The formula on this page follows the international foot of 0.3048 m. NIST SP 330 and BIPM define the SI meter. This page does not replace a tape measure.

Page updated in November 2026.