Example 1
- 1
- from GB
- to MB
1000 MB
What is 1 GB in MB? 1000 MB. SI prefix 1000, not RAM.
Type a value, from, and to. 1 GB gives 1000 MB. 1 GiB gives 1024 MiB. 1024 MiB gives 1 GiB. Prefixes, not a RAM reading.
SI 1000 and IEC 1024 prefixes. Not a RAM reading from the system. Payload bytes sit on JSON size.
Enter data and click Calculate.
Memory units in this calculator multiply a value by a prefix. 1 GB to MB gives 1000 MB. 1 GiB to MiB gives 1024 MiB. 1024 MiB to GiB gives 1 GiB. SI goes by 1000. IEC goes by 1024. This is not a RAM reading.
Field mem-value is a number. Selects mem-from and mem-to pick the ends. 1 × 10^9 / 10^6 = 1000. 1 × 2^30 / 2^20 = 1024. The bytes checkbox stays off in the examples. Second unit mem-to-extra is not in these three cards.
1000 MB is not free from htop. 1024 MiB does not come from Task Manager. 1 GiB is not a DIMM. Mix GB with GiB and the result splits. The calculator does not read /proc/meminfo.
JSON size next door multiplies characters by bytes. Storage cost multiplies GB by a price. Here 1 GB stays 1000 MB, the prefix alone.
Type 1, from GB to MB, then Calculate. The result is 1000 MB. A comma in 1,5 works. Zero value leaves 0. This is not a memory probe.
1 GB gives 1000 MB. 1 GiB gives 1024 MiB. 1024 MiB gives 1 GiB. Another prefix pair at 1 changes the result.
result = value × bytes[from] / bytes[to]. SI 1000, IEC 1024. Prefixes, not a RAM reading.
An SI or IEC prefix. 1 GB gives 1000 MB. 1 GiB gives 1024 MiB. This is not a RAM reading.
1000 MB
What is 1 GB in MB? 1000 MB. SI prefix 1000, not RAM.
1024 MiB
What is 1 GiB in MiB? 1024 MiB. IEC prefix 1024.
1 GiB
What is 1024 MiB in GiB? 1 GiB.
1000 MB. SI, base 1000. Not a RAM reading.
1024 MiB. IEC, base 1024.
1 GiB. The same IEC prefix the other way.
No. No /proc/meminfo and no Task Manager. Prefixes only.
GB is 1000^3. GiB is 1024^3. 1 GB and 1 GiB are two entries.
Yes. 1,5 GB to MB gives 1500 MB.
It adds a B line. The examples keep it off.
On JSON size. Here the prefix stays.
Yes as 0 in the target unit. A blank field is a number error.
The calculator counts bits, bytes or throughput from your numbers. Below are SI and bit definitions (NIST).
Page updated in 2026.